Best Dimmable Led Recessed Lights

August 31, 2024 Post a Comment

Best dimmable led recessed lights

The good news is that recessed lighting can be dimmable, and installing a dimmer switch is relatively simple. You can also purchase a variety of kits that allow for dimmable lighting in your recessed lights.

Which recessed LED lights are best?

The Best LED Recessed Lights Reviewed

HALO RA4-DM 4-inch Gimbal LED Recessed Light.
Nora Lighting NOXTW-5631 Onyx 6-Inch LED Recessed Light.
Amico 6-Inch Ultra-Thin LED Recessed Light.

Can you put a dimmer switch on a recessed light?

Installing a dimmer switch for your recessed lighting is one of the simplest ways to dramatically increase the flexibility of your lighting. It's also a fairly simple DIY project that almost anyone can do.

Are LED bulbs good for recessed lighting?

In fact, most remodeling recessed lighting uses LED bulbs because of the ease of installation, as well as the energy efficiency. LED bulbs last much longer than other kinds of light bulbs. You won't have to change them as often once you make the switch. An LED bulb can stay lit for as long as 50,000 hours.

Do LED lights need special dimmers?

Yes, LED lights require a special dimmer. An old fashioned incandescent dimmer switch will not work properly with LED bulbs. You cannot just simply lower the voltage to the LED driver.

What happens if you put a non-dimmable LED bulb in a dimmer?

So, what happens if you use non-dimmable LEDs on a dimmer? Well, at best the bulb just won't dim properly. At worst, though, you might damage the bulb. You see, dimmable LEDs have special circuitry inside that allows them to respond to varying current levels or “pulsing” current waves to produce a dimming effect.

How many recessed lights do I need for a 10x10 room?

Measure your room to see how many fixtures you will need. A common rule of thumb is that you use one recessed light for every 4 to 6 square feet of ceiling space.

How many lumens do I need for a 10 foot ceiling?

So a 10x10 foot bathroom (which is 100 sq feet) will ideally have 8000 lumens. A bedroom needs 20 foot candles per sq ft, so a 100 sq ft bedroom will need 2000 lumens. That means all the lights in the room should add up to 2000 lumens.

How do I choose an LED ceiling light?

You can refer to the following rules for lumens required by room type:

Kitchen: 2200 – 5000 lumens.
Bathroom: 1500 – 2500 lumens.
Home office: 2200 -5000 lumens.
Dining room: 1,500 – 2,500 lumens.
Living room: 1,000 – 2,000 lumens.
Bedroom: 1000 – 2000 lumens.

How do you soften LED recessed lighting?

WhiteDims are the perfect solution to dim/soften overhead indoor ceiling lights or outdoor lights without making the room to dark. If the lights are still too bright simply add another layer of White Dims. White Dims LightDims diffuse / soften harsh LED light and blend well with White Electronics.

How do I know if my recessed lights are dimmable?

#1 – If you bought a finished LED fixture or bulb, check to make sure the packaging specifically states that it is dimmable. This should be stated in the description or the technical specifications of the light.

Why are my dimmable lights not dimming?

The most common cause of dimmer powering lights but not dimming is an incompatible bulb. An overloaded or faulty dimmer can also cause it, but also it may be a problem with the wiring.

What is the best lumens for recessed lighting?

For general lighting, I recommend using lights that produce at least 600 lumens for standard height ceilings, and at least 900 lumens for tall ceilings. As long as you have a dimmer switch installed (which you always should), the higher the lumen output the better.

What is the difference between a can light and a recessed light?

Canned lights are a type of recessed lights. They get their name from the fixture that sits within the ceiling, which is a cylinder, almost like a metal can. This can is essentially the holder for a light bulb, instead of having a lower-hanging pendant that you would install the bulb into.

Is recessed lighting outdated?

Recessed lighting will never go out of style. However, the finishes and sizes will vary and change as time goes by. There are too many advantages of having the lighting recessed for them to eventually go out of style or phase out.

Why are my LED lights flickering on a dimmer switch?

put simply, LEDs flicker when their light output fluctuates. This fluctuation happens because your dimmable light-emitting diodes are designed to switch on and off at very high speed.

How do I choose an LED dimmer switch?

Choose a dimmer with a wattage rating that meets or exceeds the total wattage of all the light bulbs the dimmer will control. For example, if the dimmer controls a fixture with ten 75-watt bulbs, you need a dimmer rated for 750 watts or higher.

Why do some dimmers not work with LEDs?

A standard dimmer switch cannot be used with an LED light as you will never be able to dim the LED light either completely or not very well. LED lights need their own special electronic dimmer switch to have a fully functioning and dimming light.

What type of dimmer switch is best?

Here are the best dimmer switches.

Best Overall: Lutron Maestro LED+ Dimmer Switch at Amazon.
Best Budget: GE Rotating Dimmer Switch at Amazon. ...
Best Rocker: Lutron Diva LED+ Dimmer Switch at Amazon. ...
Best Slider: Lutron Skylark Contour LED+ Dimmer Switch at Amazon. ...
Best Smart: ...
Best Design: ...
Best Wireless: ...
Best Plug-In:

How do you make LED lights dimmable?

Simply connect the two output wires from the power supply to the dimmer unit, and then the two input wires from the LED strip. The dimmer simply acts like a valve, and the power supply unit will automatically provide the rated current and voltage to depending on the dimmer's knob position.